RLP 085 - 22lr dies & powder questions

Hello, and welcome to the Reloading Podcast here on the Firearms Radio network.   Tonight the guys are answering questions.

  1. Robert Reid Comment: Question on 22lr resizing dies. Hi Guys, I love the show, I'm slowly working through the back episodes, I'm up to ep. 38. I want to get into reloading and have picked up a mec 600jr and a rcbs rock chucker. My intention is to reload 45/70 for my handi rifle, however on a whim i purchased the Waltz 22lr re-sizing die. Originally I wanted the Waltz kit because of the custom enlarged hollow points. Now i'm thinking it might be a good way to get comfortable running the press, and i recently had issues with a batch of Remington .22lr (bucket o' bullets) that jammed in my butler creek steel lips magazines. The bullets are so loose I can spin them on the case! I thought Jim might have good insight with his machinist background and swaging projects. I know there is no substitute for reading the manual, however it is easier to listen to you guys during my commute than read a manual.
  2. John OvermanPowder measure question I have heard two different theories on where to mount a powder measure. I am not a match shooter, just a normal paper plinking guy. I have a Redding T7. I want to mount my Measure on my press with a case activated drop. I've heard there could be issues with settling. Do you guys have any advice on this?
  3. Mike Ray; Really enjoy the podcast. I was hoping to re-listen/pay attention to some of the tips Jeremy gives about reloading - measuring case capacity and such. I didn't locate that when searching for the podcasts - can you let me know which episodes may contain that? I'm going to start with 062 - I think Jeremy's first podcast, but I know there was more information in more recent ones. Great show, always a pleasure to listen,

 

Please remember to use the affiliate links for Amazon, Brownells, and Sinclair.  it really does help the show and the network.

 

Thank you for listening.

 

How to get in contact with us:

 

Reloading Podcast website.

Reloading Podcast Facebook

Reloading Podcast on Instagram

The Reloading Room

Reloading Podcast Google+

Mike Iselin on Facebook

Mike's Google+ Page

Jim Fleming on Facebook

Jim Fleming on Google+

Jason Trumbo on Facebook

Jason Trumbo on Google+

Jeremy Rowland on Facebook

Jeremy Rowland on google+

RLP 082 - Safety questions

Hello, and welcome to the Reloading Podcast here on the Firearms Radio network.   Tonight the guys are addressing a serious safety concern.

  1. We aren’t going to use the listener’s name tonight, for what are obvious reasons.
    1. Comment: I have been enjoying your podcast very much. You seem to come up with many of the same tricks and techniques I have found over the years. I think I have been reloading longer than Jim. I have noticed (Jim talks about reloading 38 Special and 357 Mag) in my manuals that when using 38 Special brass the powder charge is always less than for 357 Mag brass. I am talking 158g lead semi-wad cutters. Now my question is, does the gun you shoot the load in make the difference, or is the brass for the 38 Special weaker? Being lazy and having only 357 Mag chambers I would like to load both brass cases to the same higher charge and not mess with changing the powder adjustment on my Dillon. Any thoughts? Thanks, Name Removed  PS: I an able to find lots of 38 Special brass, 357 Mag not any where I live.
    2. Jim here, the answer to your first question sir, is yes, 38 brass doesn’t need to be made quite as strong as 357 brass, blah, blah, blah…I would never consider loading 38 brass at 357 Mag levels, purely for safety reasons, the economics of what you’re asking don’t seem to be worth the cost risk of injuries you might sustain, never mind the pain and suffering you’d incur.
  1. Next item:  Bullet pullers and other oddball equipment
    1. Bullet Puller
    2. Primer pocket plugs
  2. Use multiple sources for reloading data and weigh your charges.

 

Please remember to use the affiliate links for Amazon, Brownells, and Sinclair.  it really does help the show and the network.

 

Check out the Patriot Patch Company and the Firearms Radio Network and thank them for supporting our show.

 

Thank you for listening.

 

How to get in contact with us:

 

Reloading Podcast website.

Reloading Podcast Facebook

Reloading Podcast on Instagram

The Reloading Room

Reloading Podcast Google+

Mike Iselin on Facebook

Mike's Google+ Page

Jim Fleming on Facebook

Jim Fleming on Google+

Jason Trumbo on Facebook

Jason Trumbo on Google+

Jeremy Rowland on Facebook

Jeremy Rowland on google+