Reloading Podcast ep 210 - the invisible episode

Hey all, Episode 210 has horrible audio and I just won't post it.  Parts are good but I've deleted about half of it due to background noises and echos.  If you really want to suffer through it, you can check out the you tube video, or send an email to reloadingpodcast@gmail.com and I'll share the audio with you.  211 was much better, and will post as soon as it is edited.

Source: https://firearmsradio.tv/reloading-podcast

Reloading Podcast 209 - ruh roh it went kaboom

Hello, and welcome to the Reloading Podcast here on the Firearms Radio Network.  

Tonight the guys are answering some more questions.

  1. *Currently listening to episode 208*

    So I am one of those people that only listen to the audio-only podcast and I want to say thank you for all the info. I have been reloading for about 4 years and prolly have close to around 6k rounds loaded so far. I thoroughly enjoy learning new things and reaffirming what I think I know.

    I do have a question that I've heard mixed things about.
    I reload my rifles more for hunting. How much does off center flash holes affect accuracy? I only shoot 150 yards or less on average but I do get some 400 yard shots occasionally.
    I'm more concerned with hunter's accuracy and not super precision target loads.
    Any input would be appreciated.

     

  2. Mike Parr
    How much impact does a press have on finished ammo for long range centerfire rifle.

  3. Scott Shaw shared his first post.

    I loved this Bisley Blackhawk in .45LC. Sadly I blew it up with way too hot a load. A Hornady kit with a defective powder scale. I found out the hard way that it weighed 3X times the powder that was the load. 6.2 grains of Titegroup was the right amount , but 18 grains was what went in the case. The sight cut my head , but otherwise OK. Could have been much worse !

     

  4. Miguel Jurna

    Ultra-sonic Cleaners - who uses them / pro - con - - of them?

    I have one I use for cleaning my gun parts - barrels - as well as watches and jewelry

    What do you use in them?

    Saw a video last night of RCSB new ultrasonic cleaner - no money to buy this one - but I do have an old Harbor Freight 2.5 liter cleaner

    Do you have your special cleaning solution or do you buy the ready made solutions offered by Lyman or Hornady?

     

 








 

blown up bisley.jpg

Reviews:


 

Please remember to use the affiliate links for Amazon and Brownells from the Webpage  it really does help the show and the network.

 

Patreons

  • New Patreons:

  • Current Patreons: Mr. Anonymoose, Mark H, John. C, Shane D, Anthony B, Tim A, Mike S, Russ H, Atilla the Hun, Richard C, Joel L., Rick R.,  Aaron S, David S. Erich S, Troy S, Peter D, and Brewer Bill

  • RLP pledge link

 

Thank you for listening.


 

How to get in contact with us:

Google Voice # 608-467-0308

Reloading Podcast website.

Reloading Podcast Facebook

Reloading Podcast on Instagram

The Reloading Room

Reloading Podcast Google+

Mike Iselin on Facebook

Mike's Google+ Page

Jim Fleming on Facebook

Jim Fleming on Google+

Jason Trumbo on Facebook

Jason Trumbo on Google+

Jeremy Rowland on Facebook

Jeremy Rowland on google+

Trevor Furlotte on Facebook

SlamFire Radio on Facebook

Trevor Furlotte Gmail

 

Source: https://firearmsradio.tv/reloading-podcast

Reloading Podcast 208 - just the 2

Hello, and welcome to the Reloading Podcast here on the Firearms Radio Network.  

Tonight the guys are talking on various topics, mostly newbie stuff.

  1. Where can I buy a copy of the ABC’s of Reloading

    ABCs of Reloading




 

Reviews:


 

Please remember to use the affiliate links for Amazon and Brownells from the Webpage  it really does help the show and the network.

 

Patreons

  • New Patreons:.

  • Current Patreons: Mr. Anonymoose, David S, Russ H, Troy S, Mike S, Erich S, Tim A, The Big Bore, T-Rex, AJ, Kalroy, and Mark K, Aaron S, Rick R, Mark H, KC3FHH, Anthony B, Peter D, Richard C, Shane D, Tony S, Winfred C, Aaron R, Patch Rat, Michael S, Sean C, N7FFL, Drew, , Joel L, Erich S., Matthew T., bt213456 and Brewer Bill

  • RLP pledge link

 

Thank you for listening.


 

How to get in contact with us:

Google Voice # 608-467-0308

Reloading Podcast website.

Reloading Podcast Facebook

Reloading Podcast on Instagram

The Reloading Room

Reloading Podcast Google+

Mike Iselin on Facebook

Mike's Google+ Page

Jim Fleming on Facebook

Jim Fleming on Google+

Jason Trumbo on Facebook

Jason Trumbo on Google+

Jeremy Rowland on Facebook

Jeremy Rowland on google+

Trevor Furlotte on Facebook

SlamFire Radio on Facebook

Trevor Furlotte Gmail

 

Source: https://firearmsradio.tv/reloading-podcast

Reloading Podcast 207 - What do you mean it shrinks?

Hello, and welcome to the Reloading Podcast here on the Firearms Radio Network.  

Tonight the guys are answering some questions.

  1. My wife enjoys shooting my Marlin 336 chambered in 35 Remington. However, with the length of the stock and the amount of recoil, it takes its toll on her. She is on the petite side at 4’11” with length of Arne to match. I am currently loading 200 grain Hornady RN. I was thinking of trying out some lighter 357 bullets to maybe lighten the felt recoil so she can enjoy it more. Has anyone done this, and what were the results? It is an older gun (according to Marlin, 1952) and had sentimental value as it was my fathers. I don’t want to wear out the barrel.
    I am also thinking of getting her a 243, or a 6.5 with an adjustable stock that would be for both or us!
    Thanks for any input.

  2. James Seltzer shared a link.
    I have been behind on the podcast, life has been crazy. Anyways episode 193 there was discussion about trimming straight wall pistol case and whether or not they get longer with firing. I came across this article some time back. Basically this guy fired and reloaded a 45acp case around 50 times. The end result was that not only did it not get longer but it actually got shorter. The primer pocket got shallower too.

  3. Avery Lee Honeycutt
    Question: Do most of you clean your brass in a tumbler before you remove the primer and resize the brass? Or do you clean it after the primer is removed?

  4. Daniel Pate
    So here's the thing. I have helped my dad do reloading in the past and he has expressed I could use his bench any time. My dilemma is I don't generally have time to drive all the way out to his place. Second I live in a somewhat small apartment and don't know is there are reloading equipment I can fit in my work space. Can anyone point me in the direction of some space conscious equipment?

  5. Jeff Kiper
    Knowing what you know now. Would you start off with a single stage, multiple single stages, turret, or progressive? I plan in loading rifles , 300 blackout, 450 bushmaster. In the future pistols maybe. Low round count 300-500 rounds a year.
    The standard 30-30, 30-06, 223 ,243, 270, 7mm-08, 308, 9mm ,40 ,45acp, 357. I will be setup to load every round I have, even if I choose not to load them currently. One day I may be loading out of necessity.





 

Reviews:


 

Please remember to use the affiliate links for Amazon and Brownells from the Webpage  it really does help the show and the network.

 

Patreons

  • New Patreons: Erich S., Matthew T., and bt213456.

  • Current Patreons: Mr. Anonymoose, David S, Russ H, Troy S, Mike S, Erich S, Tim A, The Big Bore, T-Rex, AJ, Kalroy, and Mark K, Aaron S, Rick R, Mark H, KC3FHH, Anthony B, Peter D, Richard C, Shane D, Tony S, Winfred C, Aaron R, Patch Rat, Michael S, Sean C, N7FFL, Drew, , Joel L, and Brewer Bill

  • RLP pledge link

 

Thank you for listening.


 

How to get in contact with us:

Google Voice # 608-467-0308

Reloading Podcast website.

Reloading Podcast Facebook

Reloading Podcast on Instagram

The Reloading Room

Reloading Podcast Google+

Mike Iselin on Facebook

Mike's Google+ Page

Jim Fleming on Facebook

Jim Fleming on Google+

Jason Trumbo on Facebook

Jason Trumbo on Google+

Jeremy Rowland on Facebook

Jeremy Rowland on google+

Trevor Furlotte on Facebook

SlamFire Radio on Facebook

Trevor Furlotte Gmail

 

Source: https://firearmsradio.tv/reloading-podcast

Reloading Podcast 206 - loading for the reformation and other stuff

Hello, and welcome to the Reloading Podcast here on the Firearms Radio Network.  Tonight the guys are talking about the Reformation and other things.

  1. Subject: Franklin Armory Reformation Straight Rifling bullet and the hand loader

    Message: The "straight rifling" in Franklin Armory's Reformation not-a-rifle-not-a-pistol-not-a-shotgun gun and the issues it creates with bullet stability has created a lot of, mostly derisive, commentary since SHOT. It has been observed that standard .223 bullets have a high probability of tumbling due to the standard design of bullets, with more mass to the rear than to the front, and the lack of stabilizing spin imparted.
    Franklin Armory's solution is to use the "nerf football" bullet which puts fins at the rear, thus moving the mass to the front of the bullet and the lightweight drag of the fins to the rear. Again, this has prompted a lot of derision, particularly surrounding single-source availability of the bullet.
    But I think I might have an idea for an alternative and wanted to get your take on it.
    The basis of Franklin Armory's solution is to use a bullet which is drag stabilized instead of spin stabilized. It occurred to me that there are already "bullets," from several different manufacturers, which can achieve the same results. I'm referring to .22 caliber copper-plated air-gun pellets. The skirt on the pellet, along with the hollow base, and sort of pointed, or at least round-nose, design could create enough drag stabilization to prevent tumbling and promote more reasonable accuracy. The skirt on the pellet should expand and allow for a proper seal much the same as the classic Minie Bullet. If not driven with too much pressure, I'm guessing that the copper plate should survive, after all .22LR chamber adapters work well enough in AR's, right?
    I can see some possible "gotchas" though. The heaviest .22 cal. copper-plated pellets I could find were 21 grains, way less than the 55 grain .223 bullets. The powder loads and ballistics would have to be figured out. And do you think that their shorter length might make chambering from magazine more likely to fail? How much effect would the shorter bullet, and seating depth, have on accuracy due to jumping the lead?
    I'm curious about your thoughts on this. While I've hand-loaded for a handful of cartridges for a few years now, I'm still too new to handloading to feel comfortable undertaking this experiment myself, nor do I have any intention of buying a Reformation, so this is all hypothetical to me.

    Thanks,
    Kirk

  2. Reloading shortened 38 special brass
    Message: I’ve asked this question before but didn’t get a reply-so I’ll try again.
    My friends dad passed away and left me a few guns and reloading stuff-one of the things he left in his shop were 5 gallon buckets of brand new 38 special brass-it appears to never have been fired-but they have all been shortened to right at .75 inches. Can I reload these using a very light 38 special load? I’d like to shoot them out of an S&W mod 10 and a lever rifle in .357. Is it safe? Thanks, M.D

  3. Hey guys. Been listening for a while now and just got off my butt and joined the fb group. Got a quick question. I would like to start reloading for my old martini and have no mentor. ( it’s mostly been iraqveteran8888, abc’s of reloading, and you all.) I have been watching iv88 YouTube as he loads for the martini but one thing is, he usuals a micro lathe to trim the 24 gauge shotshell. I don’t have the $400 to drop on a lathe at this time. Is there any suggestions you have for trimming down the brass? I was thinking of pipe cutter or bandsaw. Am I crazy for thinking this? It’s just for plinking at this time. Any input would be appreciated. I want to do this right and as safely as possible.  Jacob

    1. Lil Crow Gunworks

    2. Chop saw




 

Reviews:


 

Please remember to use the affiliate links for Amazon and Brownells from the Webpage  it really does help the show and the network.

 

Patreons

  • New Patreons: Erich S., Matthew T., and bt213456.

  • Current Patreons: Mr. Anonymoose, David S, Russ H, Troy S, Mike S, Erich S, Tim A, The Big Bore, T-Rex, AJ, Kalroy, and Mark K, Aaron S, Rick R, Mark H, KC3FHH, Anthony B, Peter D, Richard C, Shane D, Tony S, Winfred C, Aaron R, Patch Rat, Michael S, Sean C, N7FFL, Drew, , Joel L, and Brewer Bill

  • RLP pledge link

 

Thank you for listening.


 

How to get in contact with us:

Google Voice # 608-467-0308

Reloading Podcast website.

Reloading Podcast Facebook

Reloading Podcast on Instagram

The Reloading Room

Reloading Podcast Google+

Mike Iselin on Facebook

Mike's Google+ Page

Jim Fleming on Facebook

Jim Fleming on Google+

Jason Trumbo on Facebook

Jason Trumbo on Google+

Jeremy Rowland on Facebook

Jeremy Rowland on google+

Trevor Furlotte on Facebook

SlamFire Radio on Facebook

Trevor Furlotte Gmail

 

Source: https://firearmsradio.tv/reloading-podcast

Reloading Podcast 205 - Swaging primer pockets

Hello, and welcome to the Reloading Podcast here on the Firearms Radio Network.  

Tonight the guys are swaging primer pockets.

  1. RCBS Primer Pocket swager combo 2

  2. Lee Auto Prime XR




 

Reviews:


 

Please remember to use the affiliate links for Amazon and Brownells from the Webpage  it really does help the show and the network.

 

Patreons

  • New Patreons: Erich S., Matthew T., and bt213456.

  • Current Patreons: Mr. Anonymoose, David S, Russ H, Troy S, Mike S, Erich S, Tim A, The Big Bore, T-Rex, AJ, Kalroy, and Mark K, Aaron S, Rick R, Mark H, KC3FHH, Anthony B, Peter D, Richard C, Shane D, Tony S, Winfred C, Aaron R, Patch Rat, Michael S, Sean C, N7FFL, Drew, , Joel L, and Brewer Bill

  • RLP pledge link

 

Thank you for listening.


 

How to get in contact with us:

Google Voice # 608-467-0308

Reloading Podcast website.

Reloading Podcast Facebook

Reloading Podcast on Instagram

The Reloading Room

Reloading Podcast Google+

Mike Iselin on Facebook

Mike's Google+ Page

Jim Fleming on Facebook

Jim Fleming on Google+

Jason Trumbo on Facebook

Jason Trumbo on Google+

Jeremy Rowland on Facebook

Jeremy Rowland on google+

Trevor Furlotte on Facebook

SlamFire Radio on Facebook

Trevor Furlotte Gmail

 

Source: https://firearmsradio.tv/reloading-podcast

Reloading Podcast 204 - a little of this, a little of that

 

Hello, and welcome to the Reloading Podcast here on the Firearms Radio Network.  

Tonight the guys are answering a couple emails and questions.

 

  1. Sorry gang, but Top Pack Defense doesn’t have that kit I bought on their website.






 

Reviews:

Author: Fixit 156

Rating: ⭐⭐⭐⭐⭐

Title: What a great podcast

Review: This is the first podcast that i listen to at work. love the atmosphere of the show. hang out with like minded people. have been reloading for over 35 five years and still learn something. Keep up the good work guys. and you should respect your elders like Jim. :)

 

Author: Jboomer59

Rating: ⭐⭐⭐⭐⭐

Title: Enjoy listening.

Review: I have not had the chance to watch live, but enjoy listening to the podcast. You guys do a good job, of answering questions and passing on your reloading knowledge. I’ve been reloading and hand loading for about 34 years, but there’s always something to learn. Keep up the good work. Archie

 



 

Please remember to use the affiliate links for Amazon and Brownells from the Webpage  it really does help the show and the network.

 

Patreons

  • New Patreons: Erich S., Matthew T., and bt213456.

  • Current Patreons: Mr. Anonymoose, David S, Russ H, Troy S, Mike S, Erich S, Tim A, The Big Bore, T-Rex, AJ, Kalroy, and Mark K, Aaron S, Rick R, Mark H, KC3FHH, Anthony B, Peter D, Richard C, Shane D, Tony S, Winfred C, Aaron R, Patch Rat, Michael S, Sean C, N7FFL, Drew, , Joel L, and Brewer Bill

  • RLP pledge link

 

Thank you for listening.


 

How to get in contact with us:

Google Voice # 608-467-0308

Reloading Podcast website.

Reloading Podcast Facebook

Reloading Podcast on Instagram

The Reloading Room

Reloading Podcast Google+

Mike Iselin on Facebook

Mike's Google+ Page

Jim Fleming on Facebook

Jim Fleming on Google+

Jason Trumbo on Facebook

Jason Trumbo on Google+

Jeremy Rowland on Facebook

Jeremy Rowland on google+

Trevor Furlotte on Facebook

SlamFire Radio on Facebook

Trevor Furlotte Gmail

 

Source: https://firearmsradio.tv/reloading-podcast

Reloading Podcast 203 - Uh oh, the old people are in charge....

Hello, and welcome to the Reloading Podcast here on the Firearms Radio Network.  

Tonight the guys are without Mike and on the loose.

  1. Ian

  2.  

  3. Question for the podcast. Newbie here. Best way to deal with static in your powder throwers and cases? I use a Lee Perfect Powder Measure. Static is bad when I change powders. Thanks. De W1JIW ( for those who know. 73).

  4.  
  5. .......

  6.  
  7. Chris shared his first post.

  8. New Member · 9 hrs · Indianapolis, IN

  9. Hello all! I am wanting to get into reloading. I am looking at starting with a single stage press. I need help distinguishing between the Lee Precision Anniversary Challenge Kit II and the Lee Precision Breech Lock Challenger Kit. The Anniversary Kit is $120.59 on Amazon and the Breech Lock is $164.27. Is the Breech Lock worth it?

  10.  
  11. ......

  12.  
  13. Joe

  14. May 8 at 11:44am

  15. Do you have to chamfer the brass every time you shoot it?

  16.  
  17.  
  18. ..........

  19.  
  20.  
  21.  
  22. Greg

  23. 22 hrs

  24. What do you guys recommend for neck turning tools?

  25.  
  26. .....

  27.  
  28.  
  29. I have a Lee classic turret press which works well for me to learn on. A question I have is about crimps. I am currently reloading .38 using x-treme copper plated 125 GR. I have shot about 250 of them and they seem pretty consistent. I feel that since they are consistent I am good with that crimp, however I am getting ready to start reloading for my .45 and that could be a totally different story.

  30. ....

  31.  
  32. Another question concerning .38/.357, can I load the magnum cartridge the same as the .38 cartridge as far as powder measure or will it make a difference in the pressure in a detrimental way?

  33. ....

  34.  
  35. Another newby question--how often to change tumbler media?My Lyman tells me the brand for every bullet weight in all of its data. I would assume that's not set in stone, for example, should I decide to practice, and the Lyman lists hollow points for 180 grain bullets, I don't actually have to use HP rounds, as long as they are 180 gr bullets? Am I correct on this, or will this require corrective surgery? (I am aware cast bullets are a different beast)

  36. …………….

  37. I'm looking through online sources for components, midway seems fair enough thus far, but as always, you guys have more experience in this; so any more sources you know of? I watch a lot of threads on here, and I see several instances of your LGS being out of your favored powders. Now I realise experimentation is a big chunk of the addiction to reloading, and I'm all for it, but just in case what are some good online sources for that?

  38. ……………….

  39. If you were building up a hunting load for your favorite rifle, on a blank slate, would you go for the bigger bullet? Of stay around factory ammuntion weights? What's the advantages/disadvantages of doing so?

  40. ………………….

  41. If I wanted to try to replicate +P ammo (I don't at this time, but my EDC is rated for it, so trying it may eventually be a consideration) what would be a good manual, online or otherwise, that'd be a good and safe way to try to replicate them?

  42. …………………………………………………………...

  43. Is there a product that makes finding/picking up brass easier in grass? Or am I pretty much stuck spending more time hunting shell's than I am shooting?

  44.  






 

Reviews:


 

Please remember to use the affiliate links for Amazon and Brownells from the Webpage  it really does help the show and the network.

 

Patreons

  • New Patreons: Erich S., Matthew T., and bt213456.

  • Current Patreons: Mr. Anonymoose, David S, Russ H, Troy S, Mike S, Erich S, Tim A, The Big Bore, T-Rex, AJ, Kalroy, and Mark K, Aaron S, Rick R, Mark H, KC3FHH, Anthony B, Peter D, Richard C, Shane D, Tony S, Winfred C, Aaron R, Patch Rat, Michael S, Sean C, N7FFL, Drew, , Joel L, and Brewer Bill

  • RLP pledge link

 

Thank you for listening.


 

How to get in contact with us:

Google Voice # 608-467-0308

Reloading Podcast website.

Reloading Podcast Facebook

Reloading Podcast on Instagram

The Reloading Room

Reloading Podcast Google+

Mike Iselin on Facebook

Mike's Google+ Page

Jim Fleming on Facebook

Jim Fleming on Google+

Jason Trumbo on Facebook

Jason Trumbo on Google+

Jeremy Rowland on Facebook

Jeremy Rowland on google+

Trevor Furlotte on Facebook

SlamFire Radio on Facebook

Trevor Furlotte Gmail

 

Source: https://firearmsradio.tv/reloading-podcast

Reloading Podcast 202 - NRAAM 2018

Hello, and welcome to the Reloading Podcast here on the Firearms Radio Network.  

Tonight the guys are talking about the NRAAM.

  1. Redding Press Winner Ronnie Sims

  2. Lyman new press lineup

  3. Brian Nixon’s new products






 

Reviews:


 

Please remember to use the affiliate links for Amazon and Brownells from the Webpage  it really does help the show and the network.

 

Patreons

  • New Patreons: Erich S., Matthew T., and bt213456.

  • Current Patreons: Mr. Anonymoose, David S, Russ H, Troy S, Mike S, Erich S, Tim A, The Big Bore, T-Rex, AJ, Kalroy, and Mark K, Aaron S, Rick R, Mark H, KC3FHH, Anthony B, Peter D, Richard C, Shane D, Tony S, Winfred C, Aaron R, Patch Rat, Michael S, Sean C, N7FFL, Drew, , Joel L, and Brewer Bill

  • RLP pledge link

 

Thank you for listening.


 

How to get in contact with us:

Google Voice # 608-467-0308

Reloading Podcast website.

Reloading Podcast Facebook

Reloading Podcast on Instagram

The Reloading Room

Reloading Podcast Google+

Mike Iselin on Facebook

Mike's Google+ Page

Jim Fleming on Facebook

Jim Fleming on Google+

Jason Trumbo on Facebook

Jason Trumbo on Google+

Jeremy Rowland on Facebook

Jeremy Rowland on google+

Trevor Furlotte on Facebook

SlamFire Radio on Facebook

Trevor Furlotte Gmail

 

Source: https://firearmsradio.tv/reloading-podcast

Reloading Podcast 201 - Red vs Blue vs Green

Hello, and welcome to the Reloading Podcast here on the Firearms Radio Network.  

Tonight the guys are answering more questions.

  1. Audio seems better the last few weeks. Thanks for tackling it. I watched you get rid of mic filter thing...caught you at a bad moment. Anyway things seem good now!
    I have a question about “energy” or whatever else it’s called to figure out the size and speed of a bullet for hunting. I can’t find much info on that. If that’s not really related I understand.
    DSReiss

  2. Hi Mike,
    I have been using a Lyman turret press for two years and like it,but it's getting old pulling the handle 4 times per cartridge. Will use the turret for rifle,but want to upgrade to a progressive for pistol(9mm and 45acp).
    I have read many reviews on numerous makes and models of progressives and it seems to me that Dillon has the best reviews and customer satisfaction but at a price point that is hard for me to justify. It seems to me the main complaint I hear on the Lee presses is the priming system. I prime off the press so I am thinking this won't be an issue for me. I have looked at the Loadmaster and the Pro 1000.
    I don't know what I would do with 5 stations on the Loadmaster and a 4th station would be nice on the Pro 1000.
    I am not a competitive shooter and might load 1,500 to 2,000 rounds a year.
    I am asking you these questions because you have a Dillon and a Lee progressive and would appreciate your input.
    Thank you for the help.
    Take care,
    Rob

  3. Hello folks,
    I am building a .300 AAC and thus have been researching the conversion of 5.56/.223 brass into .300 AAC for hand loading. What are you guys thoughts on the necessity of annealing the mouths of my cut cases, and on annealing in general? Is the juice worth the squeeze?
    Thanks and happy shooting.
    -Jim B

  4. Hey Mike.
    I have a suggestion after listening to the last podcast regarding dippers. I'm a big fan of powder dippers and reload for my 30-30 with them a lot. Just thinking maybe you could go over calculating and/or converting cc's to grains using the VMD table for those who might be confused about measuring weight vs volume.
    Keep up the good work!






 

Reviews:


 

Please remember to use the affiliate links for Amazon and Brownells from the Webpage  it really does help the show and the network.

 

Patreons

  • New Patreons:

  • Current Patreons: Mr. Anonymoose, David S, Russ H, Troy S, Mike S, Erich S, Tim A, The Big Bore, T-Rex, AJ, Kalroy, and Mark K, Aaron S, Rick R, Mark H, KC3FHH, Anthony B, Peter D, Richard C, Shane D, Tony S, Winfred C, Aaron R, Patch Rat, Michael S, Sean C, N7FFL, Drew, , Joel L, and Brewer Bill

  • RLP pledge link

 

Thank you for listening.


 

How to get in contact with us:

Google Voice # 608-467-0308

Reloading Podcast website.

Reloading Podcast Facebook

Reloading Podcast on Instagram

The Reloading Room

Reloading Podcast Google+

Mike Iselin on Facebook

Mike's Google+ Page

Jim Fleming on Facebook

Jim Fleming on Google+

Jason Trumbo on Facebook

Jason Trumbo on Google+

Jeremy Rowland on Facebook

Jeremy Rowland on google+

Trevor Furlotte on Facebook

SlamFire Radio on Facebook

Trevor Furlotte Gmail

 

Source: https://firearmsradio.tv/reloading-podcast

Reloading Podcast 200 - Wow

Hello, and welcome to the Reloading Podcast here on the Firearms Radio Network.  

Tonight the guys are answering some questions.

  1. Nathan Brinkman Seating depth and loading to the lands. Brass manufacturers and what the hosts of the podcast prefer. Case cleaning (vibration vs rotary tumblers vs sonic).



    Russell Rusty Frederick I really like hearing Robin Sharpless on the podcast. I don't think I've ever heard anybody talk about anything with as much passion as he has for reloading.




    Tim Abbott I think it would be neat if we knew how and why you guys got into reloading? (we already know Jim got into reloading to make hunting those Brontosaurus' easier ;-).) Also, what is the one piece of advice that helped you the most?

     






 

Reviews:


 

Please remember to use the affiliate links for Amazon and Brownells from the Webpage  it really does help the show and the network.

 

Patreons

  • New Patreons:

  • Current Patreons: Mr. Anonymoose, David S, Russ H, Troy S, Mike S, Erich S, Tim A, The Big Bore, T-Rex, AJ, Kalroy, and Mark K, Aaron S, Rick R, Mark H, KC3FHH, Anthony B, Peter D, Richard C, Shane D, Tony S, Winfred C, Aaron R, Patch Rat, Michael S, Sean C, N7FFL, Drew, , Joel L, and Brewer Bill

  • RLP pledge link

 

Thank you for listening.


 

How to get in contact with us:

Google Voice # 608-467-0308

Reloading Podcast website.

Reloading Podcast Facebook

Reloading Podcast on Instagram

The Reloading Room

Reloading Podcast Google+

Mike Iselin on Facebook

Mike's Google+ Page

Jim Fleming on Facebook

Jim Fleming on Google+

Jason Trumbo on Facebook

Jason Trumbo on Google+

Jeremy Rowland on Facebook

Jeremy Rowland on google+

Trevor Furlotte on Facebook

SlamFire Radio on Facebook

Trevor Furlotte Gmail

 

Source: https://firearmsradio.tv/reloading-podcast

Reloading Podcast 199 - why did my brass do that?

Hello, and welcome to the Reloading Podcast here on the Firearms Radio Network.  

Tonight the guys are answering some questions about goofy brass situations.

  1. Hi guys,
       Just wanted to say I love the show. It’s surprising how reloading has kept me lured in even after doing it for over 15 years.
        I have what I think could be classified as an advanced question, as it even stumped me when I was asked by a fellow reloader. The question came up when I was talking to a newer reloader at my hunting club range. He explained that after he flared the cases of his 9mm, when he would seat the bullet, that sometimes the bullet appeared to seat too easily. After he noticed this issue , he tried to push the bullet into the case farther and it moved. He didn’t crimp yet, he was simply trying to Check neck tension.
    Now the details:
    -Lee cast turret press
    -Lee 9mm die set carbide sizer with factory crimp die
    -mixed range brass
    -xtreme plated bullets
        My thoughts and possible explanation to him. Being that the case has a slight taper, that maybe he over flared the cases. He didn’t think he did. I told him to only flare enough to get the bullet to start. He was wondering if the brass could be worn out. Typically I told him I look for splits etc regarding worn brass. He bought it used as once fired. I never had the issue he has had.
    What do you guys think?
    Thanks,
    Jon

  2. Having a difficult time finding AOL for all these new size coated bullets.  I am trying to reload Bayou Bullets 120 Gr TCG 9mm, can I find the max AOL for my chamber by starting long and repeat plunk checks with small seating adjustments till I find the max AOL that will pass for the bullet shape?  I might be making this too simple, but can I just test for AOL and add a small safety factor?
    Thanks for you help, a loyal podcast follower. Daryl

  3. Dear Gentlemen,
    Thank you for the excellent podcast on reloading.
    I am a new hand-loader/re-loader and new listener.
    I just listened to your recent podcast on brass preparation.
    I have a question and a request.
    For the question:
    Multiple reloading books and resources
    Single stage 45 ACP brass
    Once fired (store bought then reloaded)
    Washed with SS pin fumbler and Dawn/Lemi-Shine (not excessive duration I think) and rinse with deionized water
    Fired from one of two newer Sig Sauer P220s
    Lee carbide resizing/depriming die
    Used Hornady One-Shot lightly at a 45 degree angle (allowed to dry) to make this step smooth (I know a little overkill)
    Tumble again to get the nasty primer pocket stuff out
    Observation:
    After initial cleaning and the combination resizing/depriming step, I have observed brass rings flaking off from the case.
    Obviously it is coming from the case mouth.
    At the end of production, I do a case gauge check so I know it is the right length. Fits beautifully.
    Question:
    What is the case of this issue?
    My ideas on this anomaly:
    Low quality, thin brass that from the cleaning and die manipulation is simply failing and shearing
    Excessive cleaning (two cycles causing erosion)
    One or both firearms are an issue (not likely)
    Die is set incorrectly or too aggressively and tearing the case mouth (I believe I am pretty conservative in this regard)
    Solution:
    Regardless, I just ordered a brass trimming die from Lee to make sure my pistol cases are uniform and trimmed
    Best regards, Braden

     






 

Reviews:

Date: March 15, 2018
Author: Tangle Eye
Rating: ⭐⭐
Title: From mediocre to just bad

Review: I started listening to this podcast several months ago. This was, I think, before they started doing things live on YouTube. Back then, there was some decent technical information and discussion about the hobby even though things were a bit disorganized. Over the past several months the podcast has degenerated into private jokes and insults toward traded between the hosts, disorganized discussion that has a hard time staying on topic, one host in particular wanting to guide the discussion to show how much he knows whether relevant to the discussion or not and, worst of all, actually reading silly comments from those participating in the chat/comments feed to the listening audience. This makes me want to just turn it off. I’ll probably unsubscribe soon if things don’t turn around. They apparently only have one host that even reloads regularly any more. Instead of an informative podcast this has turned into a disorganized private discussion of little use to anyone seeking to learn more about reloading. I’d suggest the following: - Plan the episodes and be ready for relevant discussion rather than shooting from the hip, having the wrong examples, and appearing to be unprepared. - Get rid of the silly, juvenile, insults between the hosts. If you must do that, then have a session before you start recording. You sound like 8th graders in the restroom. - Stay on topic. If you are on camera there is no need to comment about what you see behind another host. - And for crying out loud stop reading what people are typing in the chat room. Those of us listening do not know these people and we absolutely donot care what they are typing unless it is a question or information relevant to the topic at hand.


 

Please remember to use the affiliate links for Amazon and Brownells from the Webpage  it really does help the show and the network.

 

Patreons

  • New Patreons:

  • Current Patreons: Mr. Anonymoose, David S, Russ H, Troy S, Mike S, Erich S, Tim A, The Big Bore, T-Rex, AJ, Kalroy, and Mark K, Aaron S, Rick R, Mark H, KC3FHH, Anthony B, Peter D, Richard C, Shane D, Tony S, Winfred C, Aaron R, Patch Rat, Michael S, Sean C, N7FFL, Drew, , Joel L, and Brewer Bill

  • RLP pledge link

 

Thank you for listening.


 

How to get in contact with us:

Google Voice # 608-467-0308

Reloading Podcast website.

Reloading Podcast Facebook

Reloading Podcast on Instagram

The Reloading Room

Reloading Podcast Google+

Mike Iselin on Facebook

Mike's Google+ Page

Jim Fleming on Facebook

Jim Fleming on Google+

Jason Trumbo on Facebook

Jason Trumbo on Google+

Jeremy Rowland on Facebook

Jeremy Rowland on google+

Trevor Furlotte on Facebook

SlamFire Radio on Facebook

Trevor Furlotte Gmail

 

Source: https://firearmsradio.tv/reloading-podcast

Reloading Podcast 198 - Lo tech and high tech powder dispensing

Hello, and welcome to the Reloading Podcast here on the Firearms Radio Network.  

Tonight the guys are covering some more on powder dispensing.

  1. Hi Tech

    1. RCBS Chargemaster

    2. Hornady LnL Auto Charge

    3. Lyman Gen 6 powder system

  2. Low Tech

    1. Lee Powder Dippers







 

Reviews:


 

Please remember to use the affiliate links for Amazon and Brownells from the Webpage  it really does help the show and the network.

 

Patreons

  • New Patreons:

  • Current Patreons: Mr. Anonymoose, David S, Russ H, Troy S, Mike S, Erich S, Tim A, The Big Bore, T-Rex, AJ, Kalroy, and Mark K, Aaron S, Rick R, Mark H, KC3FHH, Anthony B, Peter D, Richard C, Shane D, Tony S, Winfred C, Aaron R, Patch Rat, Michael S, Sean C, N7FFL, Drew, , Joel L, and Brewer Bill

  • RLP pledge link

 

Thank you for listening.


 

How to get in contact with us:

Google Voice # 608-467-0308

Reloading Podcast website.

Reloading Podcast Facebook

Reloading Podcast on Instagram

The Reloading Room

Reloading Podcast Google+

Mike Iselin on Facebook

Mike's Google+ Page

Jim Fleming on Facebook

Jim Fleming on Google+

Jason Trumbo on Facebook

Jason Trumbo on Google+

Jeremy Rowland on Facebook

Jeremy Rowland on google+

Trevor Furlotte on Facebook

SlamFire Radio on Facebook

Trevor Furlotte Gmail

 

Source: https://firearmsradio.tv/reloading-podcast

Reloading Podcast 197 - weighing part I

Hello, and welcome to the Reloading Podcast here on the Firearms Radio Network.  

Tonight the guys are talking about weighing charges.

  1. Manual scales

    1. Redding Scale

    2. RCBS new model scale

    3. RCBS 505 scale

    4. Hornady Modern scale

  2. F A powder trickler



 

Reviews:


 

Please remember to use the affiliate links for Amazon and Brownells from the Webpage  it really does help the show and the network.

 

Patreons

  • New Patreons:

  • Current Patreons: Mr. Anonymoose, David S, Russ H, Troy S, Mike S, Erich S, Tim A, The Big Bore, T-Rex, AJ, Kalroy, and Mark K, Aaron S, Rick R, Mark H, KC3FHH, Anthony B, Peter D, Richard C, Shane D, Tony S, Winfred C, Aaron R, Patch Rat, Michael S, Sean C, N7FFL, Drew, , Joel L, and Brewer Bill

  • RLP pledge link

 

Thank you for listening.


 

How to get in contact with us:

Google Voice # 608-467-0308

Reloading Podcast website.

Reloading Podcast Facebook

Reloading Podcast on Instagram

The Reloading Room

Reloading Podcast Google+

Mike Iselin on Facebook

Mike's Google+ Page

Jim Fleming on Facebook

Jim Fleming on Google+

Jason Trumbo on Facebook

Jason Trumbo on Google+

Jeremy Rowland on Facebook

Jeremy Rowland on google+

Trevor Furlotte on Facebook

SlamFire Radio on Facebook

Trevor Furlotte Gmail

 

Source: https://firearmsradio.tv/reloading-podcast

Reloading Podcast 196 - Recipes and rabbit holes

Hello, and welcome to the Reloading Podcast here on the Firearms Radio Network.  

Tonight the guys are talking about recipes and priming.

  1. You need a manual.


 

Reviews:


 

Please remember to use the affiliate links for Amazon and Brownells from the Webpage it really does help the show and the network.

 

Patreons

  • New Patreons:

  • Current Patreons: Mr. Anonymoose, David S, Russ H, Troy S, Mike S, Erich S, Tim A, The Big Bore, T-Rex, AJ, Kalroy, and Mark K, Aaron S, Rick R, Mark H, KC3FHH, Anthony B, Peter D, Richard C, Shane D, Tony S, Winfred C, Aaron R, Patch Rat, Michael S, Sean C, N7FFL, Drew, , Joel L, and Brewer Bill

  • RLP pledge link

 

Thank you for listening.


 

How to get in contact with us:

Google Voice # 608-467-0308

Reloading Podcast website.

Reloading Podcast Facebook

Reloading Podcast on Instagram

The Reloading Room

Reloading Podcast Google+

Mike Iselin on Facebook

Mike's Google+ Page

Jim Fleming on Facebook

Jim Fleming on Google+

Jason Trumbo on Facebook

Jason Trumbo on Google+

Jeremy Rowland on Facebook

Jeremy Rowland on Google+

Trevor Furlotte on Facebook

SlamFire Radio on Facebook

Trevor Furlotte Gmail

 

Source: https://firearmsradio.tv/reloading-podcast

Reloading Podcast 195 - Advanced brass prep and Robin Sharpless

Hello, and welcome to the Reloading Podcast here on the Firearms Radio Network.  

Tonight the guys are joined by Robin Sharpless and talking advanced brass prep.

  1. Jim’s Neck Turning Video

  2. Competition Shell holders

  3. Instant Indicator





 

Reviews:


 

Please remember to use the affiliate links for Amazon and Brownells from the Webpage  it really does help the show and the network.

 

Patreons

  • New Patreons:

  • Current Patreons: Mr. Anonymoose, David S, Russ H, Troy S, Mike S, Erich S, Tim A, The Big Bore, T-Rex, AJ, Kalroy, and Mark K, Aaron S, Rick R, Mark H, KC3FHH, Anthony B, Peter D, Richard C, Shane D, Tony S, Winfred C, Aaron R, Patch Rat, Michael S, Sean C, N7FFL, Drew, , Joel L, and Brewer Bill

  • RLP pledge link

 

Thank you for listening.


 

How to get in contact with us:

Google Voice # 608-467-0308

Reloading Podcast website.

Reloading Podcast Facebook

Reloading Podcast on Instagram

The Reloading Room

Reloading Podcast Google+

Mike Iselin on Facebook

Mike's Google+ Page

Jim Fleming on Facebook

Jim Fleming on Google+

Jason Trumbo on Facebook

Jason Trumbo on Google+

Jeremy Rowland on Facebook

Jeremy Rowland on google+

Trevor Furlotte on Facebook

SlamFire Radio on Facebook

Trevor Furlotte Gmail

 

Source: https://firearmsradio.tv/reloading-podcast

Reloading Podcast 194 - brass prep sucks take 2

Hello, and welcome to the Reloading Podcast here on the Firearms Radio Network.  

Tonight the guys are talking more brass prep.

  1. Trimming

  2. Case inspection

  3. Can I deprime a live primer?




 

Reviews:


 

Please remember to use the affiliate links for Amazon and Brownells from the Webpage  it really does help the show and the network.

 

Patreons

  • New Patreons: Gerrid, Carl

  • Current Patreons: Mr. Anonymoose, David S, Russ H, Troy S, Mike S, Erich S, Tim A, The Big Bore, T-Rex, AJ, Kalroy, and Mark K, Aaron S, Rick R, Mark H, KC3FHH, Anthony B, Peter D, Richard C, Shane D, Tony S, Winfred C, Aaron R, Patch Rat, Michael S, Sean C, N7FFL, Drew, , Joel L, and Brewer Bill

  • RLP pledge link

 

Thank you for listening.


 

How to get in contact with us:

Google Voice # 608-467-0308

Reloading Podcast website.

Reloading Podcast Facebook

Reloading Podcast on Instagram

The Reloading Room

Reloading Podcast Google+

Mike Iselin on Facebook

Mike's Google+ Page

Jim Fleming on Facebook

Jim Fleming on Google+

Jason Trumbo on Facebook

Jason Trumbo on Google+

Jeremy Rowland on Facebook

Jeremy Rowland on google+

Trevor Furlotte on Facebook

SlamFire Radio on Facebook

Trevor Furlotte Gmail

 

Source: https://firearmsradio.tv/reloading-podcast

Reloading Podcast 193 - Yes Virginia brass prep does really suck

Hello, and welcome to the Reloading Podcast here on the Firearms Radio Network.  

Tonight the guys are talking brass prep.

  1. What does brass do

  2. Why is brass so important?

  3. Lube?

  4. The basics




 

Reviews:


 

Please remember to use the affiliate links for Amazon and Brownells from the Webpage  it really does help the show and the network.

 

Patreons

  • New Patreons:

  • Current Patreons: Mr. Anonymoose, David S, Russ H, Troy S, Mike S, Erich S, Tim A, The Big Bore, T-Rex, AJ, Kalroy, and Mark K, Aaron S, Rick R, Mark H, KC3FHH, Anthony B, Peter D, Richard C, Shane D, Tony S, Winfred C, Aaron R, Patch Rat, Michael S, Sean C, N7FFL, Drew, , Joel L, and Brewer Bill

  • RLP pledge link

 

Thank you for listening.


 

How to get in contact with us:

Google Voice # 608-467-0308

Reloading Podcast website.

Reloading Podcast Facebook

Reloading Podcast on Instagram

The Reloading Room

Reloading Podcast Google+

Mike Iselin on Facebook

Mike's Google+ Page

Jim Fleming on Facebook

Jim Fleming on Google+

Jason Trumbo on Facebook

Jason Trumbo on Google+

Jeremy Rowland on Facebook

Jeremy Rowland on google+

Trevor Furlotte on Facebook

SlamFire Radio on Facebook

Trevor Furlotte Gmail

 

ere…

Source: https://firearmsradio.tv/reloading-podcast

Reloading Podcast 192 - Bullets

Hello, and welcome to the Reloading Podcast here on the Firearms Radio Network.  

Tonight the guys are talking about bullets.

  1. Bullets

    1. Types

    2. Designs

    3. Weight

    4. caliber/diameter

  2. Boolits

    1. Cast yourself

    2. Types of lubes/coatings




 

Links: Sierra Bullets

Acme Bullets

 

G1 vs G7 bc scale

 

 

Reviews:


 

Please remember to use the affiliate links for Amazon and Brownells from the Webpage  it really does help the show and the network.

 

Patreons

  • New Patreons:

  • Current Patreons: Mr. Anonymoose, David S, Russ H, Troy S, Mike S, Erich S, Tim A, The Big Bore, T-Rex, AJ, Kalroy, and Mark K, Aaron S, Rick R, Mark H, KC3FHH, Anthony B, Peter D, Richard C, Shane D, Tony S, Winfred C, Aaron R, Patch Rat, Michael S, Sean C, N7FFL, Drew, , Joel L, and Brewer Bill

  • RLP pledge link

 

Thank you for listening.


 

How to get in contact with us:

Google Voice # 608-467-0308

Reloading Podcast website.

Reloading Podcast Facebook

Reloading Podcast on Instagram

The Reloading Room

Reloading Podcast Google+

Mike Iselin on Facebook

Mike's Google+ Page

Jim Fleming on Facebook

Jim Fleming on Google+

Jason Trumbo on Facebook

Jason Trumbo on Google+

Jeremy Rowland on Facebook

Jeremy Rowland on google+

Trevor Furlotte on Facebook

SlamFire Radio on Facebook

Trevor Furlotte Gmail

 

Source: https://firearmsradio.tv/reloading-podcast